• Blade Break-In - Getting Long Life from a New Bandsaw Blade

Blade Break-In - Getting Long Life from a New Bandsaw Blade

Blade Break-In - Getting Long Life from a New Bandsaw Blade
  • Blade Break-In - Getting Long Life from a New Bandsaw Blade

Getting Long Life from a New Band Saw Blade

WHAT IS BLADE BREAK-IN? A new band saw blade has razor sharp tooth tips. In order to withstand the cutting pressures used in band sawing, tooth tips should be honed to form a micro-fine radius. Failure to perform this honing will cause microscopic damage to the tips of the teeth, resulting in reduced blade life.

Why Break-In a Band Saw Blade?

Completing a proper break-in on a new band saw blade will dramatically increase its life.



HOW TO BREAK IN A BLADE Select the proper band speed for the material to be cut. Click here for bi-metal speed chart.

Reduce the feed force/rate to achieve a cutting rate 20% to 50% of normal (soft materials require a larger feed rate reduction than harder materials).

Begin the first cut at the reduced rate. Make sure the teeth are forming a chip. Small adjustments to the band speed may be made in the event of excessive noise/vibration. 

During the first cut, increase feed rate/force slightly once the blade fully enters the workpiece.

With each following cut, gradually increase feed rate/force until normal cutting rate is reached

Click here to browse our bandsaw range

Products to compare:
Comparing Products

Be the first to hear about it...